
      D-Link DL10050-base FAST Ethernet Adapter
      D-Link DFE-550TX FAST Ethernet 10/100 Adapter
      D-Link DFE-550FX 100Mbps Fiber-optics Adapter
      D-Link DFE-580TX 4 Port Server Adapter
      D-Link DFE-530TXS PCI Fast Ethernet Adapter

      Installation for SCO OpenServer V5.0 MDI Driver


Getting start
-------------

0. Login as root user. (On maintenance mode)

1. Use "custom" to install the driver

    1.1 Prepare an image file

        Copy d5X.IMG onto SCO OpenServer and rename it to VOL.000.000
	(Please make sure your CD-ROM drive is available.)

            # mkdir /usr/test
            # mkdir /CDROM
            # mount -r /dev/cd0 /CDROM
            # cp /CDROM/<PATH>/d5X.IMG /usr/test/VOL.000.000
            
            * <PATH> is the driver directory.


    1.2 Execute "custom"

        /* A menu selection screen will be popped up */
        Use [->] key to move cursor to "Software" menu item. Press []
        key to get into pull down menu. Move to "Install New..." then
        press [ENTER] key.

         Begin Installation on scoopen ͻ
                                                          
         What host (machine) do you want to install from? 
                                                          
          Ŀ 
          <*> From scoopen                              
          < > From another host                         
           
                                                          
        ĺ
        [ Continue ]        [  Cancel  ]        [  Help  ]
        ͼ

        Select "From scoopen". Use [TAB] key to move cursor to
        [ Continue ] and press [ENTER] key. Press [] key to get into
        pull down menu.

         Select Media ͻ
                                                                 
         Insert media, and select media device.                  
                                                                 
                      Ŀ 
         Media Device:|Floppy Disk Driver 0_________________|v 
                      ͻ 
                       Ŀ                
                       *Floppy Disk Driver 0                 
                        Media Images                         
        ĺٺĺ
        [ Continue ]   ͼ      [  Help  ]
        ͼ

        Select "Media Images". Use [TAB] key to move cursor to
        [ Continue ] and press [ENTER] key. Press [ENTER] key again.

     Enter Image Directory ͻ
                                                                            
     Enter the full path to the directory containing media images.          
                                                                            
     Image Directory: |/usr/test__________________________________________| 
                                                                            
     Note: media images must follow the naming convention VOL.000.000, etc. 
                                                                            
                                                                            
                                                                            
    ĺ
    [   OK   ]                     [ Cancel ]                     [  Help  ]
    ͼ

        Input the path name where VOL.000.000 is located as above path
        name is /usr/test.

     Install Preference on scoopen ͻ
                                                                            
     Installing: D-Link DL10050-based FAST Ethernet Adapter Driver (version1
                                                                            
     Do you want a FULL or PARTIAL installation?                            
                                                                            
    ĺ
    [  Full  ]          [  Partial  ]        [  Cancel  ]         [  Help  ]
    ͼ

        Use [TAB] key to move cursor to [ Full ] then press [ENTER] key.
        After the installation progress, the following message is displayed.

                        Message ͻ
                            Installation complete     
                       ĺ
                                   [ OK ]             
                       ͼ

        Press [Enter] key and you will find out that

            D-Link DL10050-based FAST Ethernet Adapter Driver (ver 1.1.1)

        is added to the package list.

        Use [<-] key to move cursor back to "Host" menu item. Press []
        key to get into pull down menu and move to "Exit". Press [ENTER]
        key to exit the Software Manager.

        Now the driver is installed in the system successfully.


2. Use "netconfig" to configure the network driver.

    /* A menu selection screen will be popped up */
    At "Hardware" menu item, press [] key to get into pull down menu.
    Move cursor to "Add new LAN adapter" and press [ENTER] key.

    If you got a PCI NIC inserted on your machine, it will list as
    following:

     Add new LAN adapter ͻ
    The following adapters have been found:                                 
    Ŀ
    *   D-Link DL10050-based FAST Ethernet Adapter Compatible- PCI Bus# 0,
                                                                          
                                                                          
                                                                          
                                                                          
    ٺ
    [ Configure hardware not listed above... ]                              
    ĺ
    [ Continue ]                    [  Cancel  ]                  [  Help  ]
    ͼ

    If the "D-Link DL10050-based FAST Ethernet Adapter" has been
    displayed, press [ENTER] directly. Otherwise, use [TAB] key to
    move to "Configure hardware not listed above...". Press [ENTER]
    key.

     Add new LAN adapter ͻ
    Select network adapter to be added:                                     
    Ŀ
    *   3Com EtherLink 16/16TP Adapter                                    ^
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
        D-Link DL10050-based FAST Ethernet Adapter                        *
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  v
    ٺ
    ĺ
    [ Continue ]                   [  Cancel  ]                   [  Help  ]
    ͼ

    Use [] key to move to "D-Link DL10050-based FAST Ethernet Adapter".
    Press [ENTER] key.

     Network Driver Configuration ͻ
                                                                            
    Enter the configuration of D-Link DL10050-based FAST Ethernet Adapter   
                                                                            
                    Ŀ [ Advanced   ]
         PCI Bus#:  | 0__________________________________|v   Options...  
                                   
                    Ŀ               
      PCI Device#:  | 0__________________________________|v               
                    ͻ               
                    ںĿĿ               
    PCI Function#:    9   ^___________________________|v               
                      10                 
                       11  *                                             
       '*' - indicate  12   with other hardware                         
    ĺ* 13  ĺ
    [   OK   ]         14  v    [ Cancel ]                     [  Help  ]
    ͺٺͼ
                      ͼ

    The above screen let you fill the information of where your PCI adapter
    is located by specifying PCI Bus number, PCI Device number and PCI
    Function number.

    Note1: If you can not make sure the PCI parameters or your PCI Device
           number can not be found in the list, just leave them as default
           values. Continue the following installation. After the driver is
           installed and system is re-linked, reboot the system. Driver will
           search PCI Ethernet card automatically.

    "Advanced Options" let you specify what media type is connected and flow
    control be enable or not. If you select it, the following screen will be
    popped up.

     Advanced Network Driver Configuration ͻ
                                                                            
    Enter the configuration of D-Link DL10050-based FAST Ethernet Adapter   
                                                                            
                       Ŀ                          
    Media/Cable Type:  | AUTOSENSE____________|v                          
                       ͻ                          
                       ں ĿĿ                          
        Flow Control:   * AUTOSENSE ______|v                          
                          TP                                  
                           TP_FD                                        
       '*' - indicates c   TX100     er hardware                        
    ĺ   TX100_FD  ĺ
    [   OK   ]           ٺcel ]                    [  Help  ]
    ͼͼ

    Select the connective media.
    Note:DFE-550FX Fiber-optics adapter only support TX100_FD and TX100.

    Use [TAB] key to set Flow Control enable or disable.

     Advanced Network Driver Configuration ͻ
                                                                            
    Enter the configuration of D-Link DL10050-based FAST Ethernet Adapter   
                                                                            
                       Ŀ                          
    Media/Cable Type:  | AUTOSENSE____________|v                          
                                                 
                       Ŀ                          
        Flow Control:  | Enable_______________|v                          
                       ͻ                          
                         Ŀ                                     
       '*' - indicates c * Enable  ther hardware                        
    ĺ   Disable ĺ
    [   OK   ]           ٺancel ]                    [  Help  ]
    ͼͼ

    Press [ENTER] key to go back to "Network Driver Configuration" screen.
    Use [TAB] key to move cursor to "OK" then press [ENTER] key.

     Information ͻ
    ---  Please verify adapter is set to the configuration just entered     
    ĺ
                                  [ OK ]                                    
    ͼ

    Press [ENTER] key.

     Add Protocol ͻ
    Select one networking product to be added to                            
    D-Link DL10050-based FAST Ethernet Adapter:                             
    Ŀ
     HW D-Link DL10050-based FAST Ethernet Adapter                        
    *   - SCO IPX/SPX                                                     
        - SCO TCP/IP                                                      
                                                                          
                                                                          
    ٺ
    ĺ
    [  Add   ]                        [ Cancel ]                  [  Help  ]
    ͼ

    Use [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.

     SCO TCP/IP Configuration ͻ
                                                             
                                                             
      Local Host Name:  |scoopen_____________| [ Advanced   ]
           IP Address:  |192.9.200.1_________|   Options...  
              Netmask:  |255.255.255.0_______|               
    Broadcast Address:  |192.9.200.255_______|               
          Domain Name:  |scoopen.com_________|               
      TCP connections:  |256_________________|               
          Pseudo ttys:  |32__________________|               
                                                             
                                                             
    ĺ
     [   OK   ]             [ Cancel ]             [  Help  ]
    ͼ

    Input the required information. Use [TAB] key to move cursor to "OK"
    then press [ENTER] key.

     Message ͻ
     The following products were successfully configured into the system    
     SCO TCP/IP                                                             
     D-Link DL10050-based FAST Ethernet Adapter - PCI Bus# 0,PCI Device# 0, 
       PCI Function# 0                                                      
                                                                            
    ĺ
    [ OK ]                                                          [ Help ]
    ͼ

    Press [ENTER] key.

    At "Hardware" menu item, press [] key to get into pull down menu. Move
    to "Exit" then press [ENTER] key.

     Question ͻ
         The Unix kernel must be re-linked before the changes
    ???  made here will have an effect.                      
         Do you want to re-link the kernel now?              
    ĺ
    [ Yes ]                                            [ No ]
    ͼ

    Press [ENTER] key.

    Do you want this kernel to boot by default (y/n)    y

    Do you want the kernel environment rebuilt (y/n)    y

3. Reboot unix

   # shutdown -y -g0

***************************************************
* Another way to specify driver's PCI parameters  *
***************************************************

. Another way to modify PCI parameters is setting at booting time, shown
  as below:

   1. Specify PCI Bus#, PCI Device# and PCI Function#

       Boot
       : unix net.mdi=d5X(0) net.param=(pcb:0,pcd:14,pcf:0)

   2. Auto-search PCI adapter card

       Boot
       : unix net.mdi=d5X(0)


Note2: The IRQ number must match with the value set in ROM-BIOS before you
       specify this value, please check it.
       The IRQ for PCI bus can be accessed by pressing [DEL] key when
       system is power on and choose the proper select item to set IRQ
       for PCI bus.

       Example: ROM PCI/ISA BIOS (2A4X5C31)
                   PCI/GREEN FUNCTION SETUP
                  AWARD SOFTWARE, INC.

             Press [DEL] key  -->  PCI/GREEN FUNCTION SETUP

                                   Slot 3 Using INT# : A-PIRQ1
                                           .
                                           .
                                           .
                                   PIRQ1# Connect IRQ: 5 By Single
                                                       ~

